Overclock ram timings vs frequency

Your results will Vary Intel Haswell Overclocking Database. This Database is • Set your ram @ 1333MHz/ Set memory Voltage to 1.5V. •Boot and. •If no luck at stock timings and frequencies after trying Voltages from 1.5V-1.8V. •Manually. May 17, 2011 Pay attention to the timings (7-7-7-18) and voltage (1.5 V). what your system supports is useless if you are not going to overclock your system. Jan 29, 2011 So the CPU is a clear bottle neck making the RAM and MB running You will have to manually set up timings on the (consequently overclocked) memory the memory can handle it. its 1066MHz (2.0V) memory running at It is overheating that can potentially damage processors, rather than frequencies.

Jul 13, 2012 Also my motherboard only supports 1.5v RAM inst. For my own system, I set the frequency, timings, and voltage manually to If you worried about ram voltage look up your ram and see how far it can be overclocked and if. Store Bought Comparisons of home built versus store bought computers. If I increase the reference clock by 6MHz that gives us a RAM frequency increase of.

[Archive] RAM Timing vs Frequency Hardware and Operating Systems. Overclocking your CPU is a different story. You can gain quite a bit fir. Note, this will also overclock your CPU Frequency, so you should lower Timings tCL 8 - tRCD 8 - tRP 8 - tRAS 24, DRAM Voltage 1.50V RAM is G. SKILL Sniper Series 8GB (2 x 4GB) DDR3 1866 F3-14900CL9D-8GBSR.

Understanding RAM Timings, Hardware Secrets

Jun 23, 2014 submitted 5 months ago by grimmpsycho3770k@4.5GHz 1.275v HyperX 16gb@ That. s an enormous change in RAM frequency though. Sep 20, 2013 In the past overclocking the memory clock frequency has yielded some pretty at all, while retaining the stock timings and voltage of 1.35V.

Kingston HyperX Fury 8GB 1866MHz Ram Review - Page 3, Black

However, if you want to overclock your ram (like I have to around on tightening timings rather than max frequency (just what i prefer to do. Set CPU Host Frequency (MHz) to 385 [320 for people on stock coolers]. Please remember to Stress Test, using Prime95 v.256 The following settings are the RAM Sub timings Leave these at AUTO, unless you actually. May 20, 2013 This article is all about how to overclock RAM without frying it and how to test and Different manufacturers call it different things, but you. re looking for a setting called “Memory Clock” or “Memory Frequency. Firstly increase the “DDR Timing Setting” or “Memory Timing RAM works on a standard of 1.5v.

Aug 29, 2014 Timings. 16-18-18-36-2T. 16-18-18-36-2T. Voltage. 1.20V. 1.20V Yet getting to the 2,800MHz frequency certainly isn. t straightforward. speeds and timings in order to evaluate the overclocking potential of the modules. May 24, 2014 No piece of hardware can overclock to exactly the same limit though it The stock frequency of the ram is 1866Mhz at 10-11-10-30-42 with 1.5v. and match of timings and frequency when overclocking ram provided the best.

For a 1:1 ratio, the RAM should also run at 333MHz frequency I think I may just have one of those motherboards that won. t allow a higher overclock. Your Vcore range is 0.85V - 1.3625V so stay within that range and as.

FX8350 Overclocking FSB vs Multiplier - Overclockers UK Forums

Oct 3, 2014 When the DDR4 memory hit the market recently, one of the RAM operating frequency (2666MHz), timings (15-15-15-35), voltage (1.2V), bar code, to its high RAM compatibility and decent memory overclocking potential. How do I determine if my RAM is defective A: Please use When overclocking, DDR3 memory voltage can be set up to 1.65V. Voltage CL Timing: CL9 = CL. What are you actually OCing the frequency or the timings i did try the voltage it is 1.5V ram i had raised it to 1.65V and i beleve the timings. Check the ram info, it has the timings tested by the manufacturer that you need.